-->
Function than the sock absorber on a motorcycle is to reduce surprises when your motorcycle or motorcycle tire slowed you experience concussion because you do not mean the road surface, so that makes you fell when you drive it. Just imagine if the sock absorber is not working on your motorcycle, might cause you're not so comfortable when you drive it, or may cause damage to other kompenen, because the sock absorber up and down movement of your motorcycle to be slowed so soft that's why hosiery absorber is also known as shock absorbers. Sock absorber consisting of tubes containing the oil. Inside the cylinder there is a valve that serves to regulate oil flow. Swinging motion of the motorcycle deceleration occurs because the oil flow tube sock absorber is hampered by the valve. This is because of the narrow valve hole. If the amount of oil in a tube sock less then the work can not reduce shock absorber. If the sock absorber is not working well then it should sock absorber replaced. Sock absorber replacement is recommended once a pair of sock absorber while the other one was not damaged. This is meant to freshen up the pressure to remain balanced, not biased or skewed. To determine whether the sock absorber works or not is not a difficult thing. Usually hosiery hosiery motorcycle is damaged brekernya become uncomfortable ride. Sock absorber damage is generally caused by oil leakage. This can be seen on the tube sock brekernya. If the tube sock absorber was always wet with an oil seep, then it is leaking absorber hosiery, sock absorber should be replaced if it is not good work. Examination and treatment: 1. If during a motorcycle ride and a motorcycle swerved sometimes mistake the one hand for no apparent reason then there is the possibility of one sock brekernya damaged. Check the state of hosiery brekernya. If there is oil seepage on the jar then it means the sock absorber leaking so the pressure is not the same. Second sock absorber should be replaced. 2. If during a motorcycle ridden pengegasannya uncomfortable but normal tire pressure, no hard terlau, probably caused by the hosiery brekernya. If one sock absorber damaged, replace both. To check sock absorber, the motorcycle press down and then release the pressure suddenly. If the motorcycle quickly bounced back with the body and swinging hosiery brekernya then likely not work. Sock absorber should be replaced. 3. Check the state of suspension springs. Measure the length of the spring in the spring despite circumstances. If the length exceeds the provisions of the spring, the spring must be replaced.
